We offer products for non-intrusive flow
measurement for liquids and gases in the upstream industry. The Oil Flow
Meters are very accurate and reliable. Wherever oil is received, stored and
used, Oil Flow Meters measure, totalise and records flows precisely. Oil
Flow Meters can be installed in the pipeline and would totalise the flow of
oil flowing through the line.
Petroleum products like diesel, furnace oil, LDO and LSHS are received in
bulk by tank lorries or through railway wagons. The present system of
recording the quantity of oil receipt is either by dip-stick measurement or
by weighment of tank lorries. Both these methods suffer with inadequate
information and unsurpulous pilferage of costly fuels is quite common.
Now, one can install Oil Flow Meters at the receiving point whenever oil is
received, exact quantity can be recorded through the meter.
Positive Displacement Type
Among the many flow meter designs available today, it holds the top place
both in performance and in field proven appraisement, is must for high
Finest Accuracy & Reliability
Exceptional accuracy and reliability are the result of state-of-the-art
machining techniques; advanced quality control programs; and the most
advanced testing and proving facilities. Typical accuracy is better than
+(-) 0.5% of reading indicated. Meters accurate to better than +(-) 0.2% can
also be furnished on request.
Low Pressure Drop
Even with high viscosity products, the pressure drop across the meter is
very low. The meter can operate even under 1" head of oil. It is
successfully utilised to receive oils; especially diesel, petrol, LDO etc.
even while unloading under gravity head without extra source of pumping.
As an optional equipment pulse generators are also available for converting
the output into a pulse signal for remote instrumentation and control.
Electronic instruments for remote totalisation, flow rate indication, batch
controlling and computer interface are readily available.
||10 Lt/ Hr - 48M3/ Hr
||Upto 150o C
||0-21 Kg/ cm2 (Optional 40 Kg/ cm2)
||1000 CP maximum
||Within +(-) 0.5% (Optional +(-) 0.2%
|Nominal Bore Size
||15 mm, 20 mm, 25 mm, 40 mm, 50 mm, 80 mm
||Petroleum Products (MS, HSD, SKO, LDO, FO, LSHS),
Vegetable oils/ solvents and non corrosive liquids
||Totalisation of flow (Mechanical Counter) - Optional
- The size of the Oil Flow Meters for an application should be based on
maximum oil flow rate in the pipeline, the pipeline size and pressure
available at meter point.
- For unloading of oils under gravity head we recommend use of 80mm
size meters. Optionally 50mm meter can also be used.
- For unloading petroleum products by pump, install a 50mm/ 80mm oil
- For recording draw offs from storage tanks use 40mm, 50mm or 80mm
size meter based on the maximum oil flow rate in the line.
- For monitoring oil consumption, use 15mm, 20mm or 25mm size oil
meters based on maximum oil flow rate and the head available. If flow
rate is small and the pipeline size is big then reducers should be used.